biomass wood chips crusher is a new style and widely applied machine.
It is composed of a machine base, a knife roll, an upper and lower feeding system, a feeding system and a hydraulic buffering system, and is mainly used for crushing materials such
as logs, small-diameter wood, branches, boards, slats, and bamboo.
The crushing material can be used in paper mill, power plant, pellet factory, boiler factory.
Comprehensive Wood crusher is composed of machine base, knife roller, up and down feed mechanism, feeding device and hydraulic buffer system, mainly used for construction formwork, demolition materials, templates and other materials crushing. It has the characteristics of stable structure, high productivity and low cost.
Parameter：
| Model | LM1250-500 | LM1400-500 | LM1650-600 | LM1400-800 | LM1600-800 | LM1700-800 | LM2000-1000 | ||||||
| Feeding size(mm) | 1250*500 | 1400*500 | 1650*600 | 1400*800 | 1600*800 | 1700*800 | 2000*1000 | ||||||
| Feeding type | Belt/ChainConveyor | Chain Conveyor | Chain Conveyor | 16Mn Chain Conveyor | 16Mn Chain Conveyor | 16Mn Chain Conveyor | 16Mn Chain Conveyor | ||||||
| Feeding wood Height | Building Template≤500 Branches≤400 | Building Template≤500 Branches≤400 | Building Template≤600 Branches≤500 | Building Template≤ 800 Branches≤700 | Building Template ≤ 800 Branches≤700 | Building Template ≤ 800 Branches≤700 | Building Template ≤900 Branches≤600 | ||||||
| Roller type&Qty (piece) | Blade/hammer20 | Blade/hammer 24 | Blade/hammer 28 | hammer 24-28 | hammer 28-32 | hammer 28-32 | hammer 32 | ||||||
| Roller Diameter (mm) | 800 | 800 | 800/900 | 1050 | 1050 | 1050 | 1400 | ||||||
| Roller Speed (rpm/min) | Blade:556 /Hammer:800-926 | Blade:556 /Hammer:800-926 | Blade:556 /Hammer:800-926 | Hammer:888-926 | Hammer:888-926 | Hammer:888-926 | Hammer:425-620 | ||||||
| Main Motor Power（kw） | 110-132 | 160-200 | 200-220 | 220-250 | 250-280 | 280-315 | 355-400 | ||||||
| Feeding Motor （kw） | 5.5+7.5 | 5.5+7.5/7.5+11 | 7.5+11 | 11+15 | 11+15 | 11+15 | 15+18.5 | ||||||
| Primary Motor(kw) | 3 | 3 / 4 | 3 / 4 | 4 | 4 | 4 | 4 | ||||||
| Second Motor (kw) | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 7.5 | ||||||
| Hydraulic control form | Solenoid valve | ||||||||||||
| Discharge Length(m) | 10-12 | ||||||||||||
| Finished chip Size (mm) | 50-100 | ||||||||||||
| Capacity (t/h) | 10-15 | 15-20 | 18-25 | 25-35 | 30-45 | 35-55 | 40-60 | ||||||
Applicable Raw Material:
It is applied for waste building templates,waste wood pallets, furniture scrap, tree bark,furniture
offcut,wood branches and variety of non wood raw materials such as all kinds of bulk straw, cotton stalk, reed.It can be used with the unpacking machine.It is applied for the biomass power station, pellet plant,paper plant,fiber board factory,medicine mill,chemical plant,organic fertilizer plant and animal husbandry and other plants which use the biomass boiler.
This kind of machinery can be customized according to the customer’s requirements.(the main
power,capacity,number of knives,roller diameter, the feed size and so on.)
Product advantages:
1. Various raw materials can be worked ,widely used in different industries.
2. High production capacity and low energy consumption, reasonable structure, durable, simple operation,
high degree of automation, easy maintenance.
3. It can be fed by grabbing machine to saves manual labor greatly.
4. Feeding conveyor is composed of chain plate ,Low fault rate.
5. The finished size of wood chips can be customized by customers’ requirment.
Product Component：
It is made up of feeding system,host system,discharge system,electronic control sysytem,Hydraulic sysytem.
Strong body of biomass wood chips crusher
Strong structure ensure wood chipper run steadily without ground foundation. and the blade material is H13, anti-wearing, prolonging service life, which can cut hard wood.
Large inlet size, applied to a variety of materials. feeding method adopts feeding chain plate(Q345 steel plate material), feeding
material smoothly and evenly.
Hammers of biomass wood chips crusher
If your raw material are hard wood, wood pallets, waste building templates or other wood, for large wood crusher, the chipping room will equip with hammers instead of traditional knifes.The high rotation spped hammers will beat thmaterial into small size wood chips; The material of hammers is high manganese steel, with hard alloy particles welded on the surface, anti-wearing, prolonging service life. Hammer can be used with double-side, can reach 3000-5000 tons.
Spare Parts—Rotary Knife
65# manganese steel, anti-wearing, prolonging service life, which can cut hard wood.
Blade thickness 20mm, thin 1mm per grinding. Lifetime:4-6 months.
Spare Parts—Fixed Knife
Material: 45# manganese steel Lifetime: around 400-600h
Feed roller of biomass wood chips crusher
Feed roller adopts 45# Mn steel, with strong abrasion and precise bite force, the strength and performance higher than welded
parts.